# Potential (`galpy.potential`

)¶

## 3D potentials¶

### General instance routines¶

Use as `Potential-instance.method(...)`

- __add__
- __mul__
- __call__
- dens
- dvcircdR
- epifreq
- flattening
- lindbladR
- mass
- nemo_accname
- nemo_accpars
- omegac
- phiforce
- phi2deriv
- plot
- plotDensity
- plotEscapecurve
- plotRotcurve
- Rphideriv
- R2deriv
- r2deriv
- Rzderiv
- Rforce
- rforce
- rl
- rtide
- surfdens
- toPlanar
- toVertical
- ttensor
- turn_physical_off
- turn_physical_on
- vcirc
- verticalfreq
- vesc
- vterm
- z2deriv
- zforce

In addition to these, the `NFWPotential`

also has methods to calculate virial quantities

### General 3D potential routines¶

Use as `method(...)`

- dvcircdR
- epifreq
- evaluateDensities
- evaluatephiforces
- evaluatePotentials
- evaluatephi2derivs
- evaluateRphiderivs
- evaluateR2derivs
- evaluater2derivs
- evaluateRzderivs
- evaluateRforces
- evaluaterforces
- evaluateSurfaceDensities
- evaluatez2derivs
- evaluatezforces
- flatten
- flattening
- lindbladR
- nemo_accname
- nemo_accpars
- omegac
- plotDensities
- plotEscapecurve
- plotPotentials
- plotRotcurve
- rl
- rtide
- to_amuse
- ttensor
- turn_physical_off
- turn_physical_on
- vcirc
- verticalfreq
- vesc
- vterm

In addition to these, the following methods are available to compute expansion coefficients for the `SCFPotential`

class for a given density

### Specific potentials¶

All of the following potentials can also be modified by the specific `WrapperPotentials`

listed below.

#### Spherical potentials¶

- Burkert potential
- Double power-law density spherical potential
- Spherical Cored Dehnen potential
- Spherical Dehnen potential
- Hernquist potential
- Homogeneous sphere potential
- Isochrone potential
- Jaffe potential
- Kepler potential
- NFW potential
- Plummer potential
- Power-law density spherical potential
- Power-law density spherical potential with an exponential cut-off
- Pseudo-isothermal potential
- Spherical Shell Potential

#### Axisymmetric potentials¶

- Double exponential disk potential
- Flattened Power-law potential
- Interpolated axisymmetric potential
- Interpolated SnapshotRZ potential
- Kuzmin disk potential
- Kuzmin-Kutuzov Staeckel potential
- Logarithmic halo potential
- Miyamoto-Nagai potential
- Three Miyamoto-Nagai disk approximation to an exponential disk
- Razor-thin exponential disk potential
- Ring potential
- Axisymmetrized N-body snapshot potential

#### Ellipsoidal triaxial potentials¶

`galpy`

has very general support for implementing triaxial (or the
oblate and prolate special cases) of ellipsoidal potentials through
the general EllipsoidalPotential class. These
potentials have densities that are uniform on ellipsoids, thus only
functions of \(m^2 = x^2 + \frac{y^2}{b^2}+\frac{z^2}{c^2}\). New
potentials of this type can be implemented by inheriting from this
class and implementing the `_mdens(self,m)`

, `_psi(self,m)`

, and
`_mdens_deriv`

functions for the density, its integral with respect
to \(m^2\), and its derivative with respect to m,
respectively. For adding a C implementation, follow similar steps (use
`PerfectEllipsoidPotential`

as an example to follow).

Note that the Ferrers potential listed below is a potential of this
type, but it is currently not implemented using the
`EllipsoidalPotential`

class.

#### Spiral, bar, other triaxial, and miscellaneous potentials¶

All `galpy`

potentials can also be made to rotate using the `SolidBodyRotationWrapperPotential`

listed in the section on wrapper potentials below.

#### General Poisson solvers for disks and halos¶

#### Dissipative forces¶

## Milky-Way-like potentials¶

`galpy`

contains various simple models for the Milky Way’s
gravitational potential. The recommended model, described in Bovy
(2015), is included as
`galpy.potential.MWPotential2014`

. This potential was fit to a large
variety of data on the Milky Way and thus serves as both a simple and
accurate model for the Milky Way’s potential (see Bovy 2015 for full information on how this
potential was fit). Note that this potential assumes a circular
velocity of 220 km/s at the solar radius at 8 kpc. This potential is
defined as

```
>>> bp= PowerSphericalPotentialwCutoff(alpha=1.8,rc=1.9/8.,normalize=0.05)
>>> mp= MiyamotoNagaiPotential(a=3./8.,b=0.28/8.,normalize=.6)
>>> np= NFWPotential(a=16/8.,normalize=.35)
>>> MWPotential2014= bp+mp+np
```

and can thus be used like any list of `Potentials`

. The mass of the
dark-matter halo in `MWPotential2014`

is on the low side of
estimates of the Milky Way’s halo mass; if you want to adjust it, for
example making it 50% larger, you can simply multiply the halo part of
`MWPotential2014`

by 1.5 as (this type of multiplication works for
*any* potential in galpy)

```
>>> MWPotential2014[2]*= 1.5
```

If one wants to add the supermassive black hole at the Galactic center, this can be done by

```
>>> from galpy.potential import KeplerPotential
>>> from galpy.util import bovy_conversion
>>> MWPotential2014wBH= MWPotential2014+KeplerPotential(amp=4*10**6./bovy_conversion.mass_in_msol(220.,8.))
```

for a black hole with a mass of \(4\times10^6\,M_{\odot}\). If you want to take into account dynamical friction for, say, an object of mass \(5\times 10^{10}\,M_\odot\) and a half-mass radius of 5 kpc, do

```
>>> from galpy.potential import ChandrasekharDynamicalFrictionForce
>>> from astropy import units
>>> cdf= ChandrasekharDynamicalFrictionForce(GMs=5.*10.**10.*units.Msun,
rhm=5.*units.kpc,
dens=MWPotential2014)
>>> MWPotential2014wDF= MWPotential2014+cdf
```

where we have specified the parameters of the dynamical friction with units; alternatively, convert them directly to `galpy`

natural units as

```
>>> cdf= ChandrasekharDynamicalFrictionForce(GMs=5.*10.**10./bovy_conversion.mass_in_msol(220.,8.),
rhm=5./8.,
dens=MWPotential2014)
>>> MWPotential2014wDF= MWPotential2014+cdf
```

As explained in this section, *without* this black
hole or dynamical friction, `MWPotential2014`

can be used with
Dehnen’s gyrfalcON code using `accname=PowSphwCut+MiyamotoNagai+NFW`

and
`accpars=0,1001.79126907,1.8,1.9#0,306770.418682,3.0,0.28#0,16.0,162.958241887`

.

`galpy`

also contains other models for the Milky Way’s potential
from the literature in the `galpy.potential.mwpotentials`

module
(which also contains `MWPotential2014`

). Currently, these are:

`McMillan17`

: the potential model from McMillan (2017)`Irrgang13I`

: model I from Irrgang et al. (2013), which is an updated version of the classic Allen & Santillan (1991)`Irrgang13II`

and`Irrgang13III`

: model II and III from Irrgang et al. (2013)`DehnenBinney98I`

,`DehnenBinney98II`

,`DehnenBinney98III`

, and`DehnenBinney98IV`

for models 1 through 4 from Dehnen & Binney (1998).

Unlike `MWPotential2014`

, these potentials have physical units
turned on, using as the unit scaling parameters `ro`

and `vo`

the
distance to the Galactic center and the circular velocity at the Sun’s
radius of each potential. These can be obtained using the
`galpy.util.bovy_conversion.get_physical`

function, e.g.,

```
>>> from galpy.potential.mwpotentials import McMillan17
>>> from galpy.util.bovy_conversion import get_physical
>>> get_physical(McMillan17)
# {'ro': 8.21, 'vo': 233.1}
```

This function returns the unit-conversion parameters as a dictionary,
so they can be easily passed to other functions. For example, when
integrating an orbit in these potentials and either initializing the
orbit using observed coordinates or converting the integrated orbit to
observed coordinates, it is important to use the same unit-conversion
parameters (otherwise an error will be raised). For example, to obtain
the orbit of the Sun in the `McMillan17`

potential, we do

```
>>> from galpy.orbit import Orbit
>>> o= Orbit(**get_physical(McMillan17))
```

As an example, we integrate the Sun’s orbit for 10 Gyr in
`MWPotential2014`

, `McMillan17`

and `Irrgang13I`

```
>>> from galpy.potential.mwpotentials import MWPotential2014, McMillan17, Irrgang13I
>>> from galpy.orbit import Orbit
>>> from galpy.util.bovy_conversion import get_physical
>>> from astropy import units
>>> times= numpy.linspace(0.,10.,3001)*units.Gyr
>>> o_mwp14= Orbit(ro=8.,vo=220.) # Need to set these by hand
>>> o_mcm17= Orbit(**get_physical(McMillan17))
>>> o_irrI= Orbit(**get_physical(Irrgang13I))
>>> o_mwp14.integrate(times,MWPotential2014)
>>> o_mcm17.integrate(times,McMillan17)
>>> o_irrI.integrate(times,Irrgang13I)
>>> o_mwp14.plot(lw=0.6)
>>> o_mcm17.plot(overplot=True,lw=0.6)
>>> o_irrI.plot(overplot=True,lw=0.6)
```

which gives

Much of the difference between these orbits is due to the different present Galactocentric radius of the Sun, if we simply plot the difference with respect to the present Galactocentric radius, they agree better

```
>>> o_mwp14.plot(d1='R-8.',d2='z',lw=0.6,xlabel=r'$R-R_0\,(\mathrm{kpc})$')
>>> o_mcm17.plot(d1='R-{}'.format(get_physical(McMillan17)['ro']),d2='z',overplot=True,lw=0.6)
>>> o_irrI.plot(d1='R-{}'.format(get_physical(Irrgang13I)['ro']),d2='z',overplot=True,lw=0.6)
```

We can also compare the rotation curves of these different models

```
>>> from galpy.potential import plotRotcurve
>>> plotRotcurve(MWPotential2014,label=r'$\mathrm{MWPotential2014}$',ro=8.,vo=220.) # need to set ro and vo explicitly, because MWPotential2014 has units turned off
>>> plotRotcurve(McMillan17,overplot=True,label=r'$\mathrm{McMillan\, (2017)}$')
>>> plotRotcurve(Irrgang13I,overplot=True,label=r'$\mathrm{Irrgang\ et\ al.\, (2017), model\ I}$')
>>> legend()
```

An older version `galpy.potential.MWPotential`

of
`MWPotential2014`

that was *not* fit to data on the Milky Way is
defined as

```
>>> mp= MiyamotoNagaiPotential(a=0.5,b=0.0375,normalize=.6)
>>> np= NFWPotential(a=4.5,normalize=.35)
>>> hp= HernquistPotential(a=0.6/8,normalize=0.05)
>>> MWPotential= mp+np+hp
```

but `galpy.potential.MWPotential2014`

supersedes
`galpy.potential.MWPotential`

and its use is no longer recommended.

## 2D potentials¶

### General instance routines¶

Use as `Potential-instance.method(...)`

### General axisymmetric potential instance routines¶

Use as `Potential-instance.method(...)`

### General 2D potential routines¶

Use as `method(...)`

### Specific potentials¶

All of the 3D potentials above can be used as two-dimensional potentials in the mid-plane.

In addition, a two-dimensional bar potential, two spiral potentials, the Henon & Heiles (1964) potential, and some static non-axisymmetric perturbations are included

## 1D potentials¶

### General instance routines¶

Use as `Potential-instance.method(...)`

### General 1D potential routines¶

Use as `method(...)`

### Specific potentials¶

One-dimensional potentials can also be derived from 3D axisymmetric potentials as the vertical potential at a certain Galactocentric radius

## Potential wrappers¶

Gravitational potentials in `galpy`

can also be modified using wrappers, for example, to change their amplitude as a function of time. These wrappers can be applied to *any* `galpy`

potential (although whether they can be used in C depends on whether the wrapper *and* all of the potentials that it wraps are implemented in C). Multiple wrappers can be applied to the same potential.